"Polígono 5, parcela 23, municipality of Villanueva." That is how rural properties appear in many Spanish deeds, inheritance papers and old tax bills. It is a perfectly valid way to identify land, but it has one problem: it does not tell you where the land is.
This guide explains what the polígono and the parcela are, how to turn them into a full cadastral reference and how to see the property on the map, with its boundaries and GPS coordinates so you can get there.
What polígono and parcela mean
The Spanish Catastro divides the rural land (suelo rústico) of each municipality into polígonos: zones bounded by tracks, rivers or roads, numbered within the municipal area. Inside each polígono, every property is a parcela with its own number.
That is why "parcela 23" means nothing without the polígono, and "polígono 5, parcela 23" means nothing without the municipality: every municipality has its own polígono 5.
Urban land does not use polígonos: properties there are identified by block (manzana) and parcel, and above all by their street address.
Where they sit inside the cadastral reference
The cadastral reference of a rural property has 20 characters. For example: 32077A005005040000AH.
| Position | Example | Meaning |
|---|---|---|
| 1-2 | 32 | Province (Catastro code) |
| 3-5 | 077 | Municipality (Catastro code) |
| 6 | A | Sector or sub-area (agregado) |
| 7-9 | 005 | Polígono |
| 10-14 | 00504 | Parcela |
| 15-18 | 0000 | Property identifier |
| 19-20 | AH | Check characters |
In other words, the polígono and the parcela are already inside the reference. The first 14 characters are enough to locate the land.
More on how to read a reference in what a Spanish cadastral reference is and where to find it.
Method 1 — You have the cadastral reference
This is the fastest route. You will find the reference on the rural IBI tax bill, in the deed or on a cadastral certificate.
- Open the cadastral map and paste the reference into the search box (14 or 20 characters).
- The property appears with its outline over the aerial photo.
- The detail card shows the area, the use and the GPS coordinates.
Method 2 — You only have municipality, polígono and parcela
There are two ways to go.
The official lookup. The Catastro's Sede Electrónica lets you search rural properties by province, municipality, polígono and parcela, and gives you back the cadastral reference. It is free and needs no digital certificate for non-protected data. With that reference, go back to method 1 to see it on the map and get the GPS position.
Rebuild the reference. If you would rather do it straight on the map, there is a handy trick:
- On the map, go to the municipality and tap any rural property in the same area.
- Copy the first 6 characters of its reference: province, municipality and sector letter (for example
32077A). - Add the polígono as 3 digits (
005) and the parcela as 5 digits (00023). - Search for those 14 characters:
32077A00500023.
One warning: in municipalities with several sub-areas (former villages merged into the municipality), the letter in position 6 changes from one to another. If the search finds nothing, tap a property closer to where yours should be and use its letter.
Method 3 — No numbers: search on the map
If all you know is roughly where the land is ("the vineyard next to the cemetery track"), the map is the tool:
- Switch to satellite view and look for landmarks: tracks, chapels, streams, farm buildings.
- Tap the parcel that fits: you will see its polígono and parcela in the reference and can check whether they match your papers.
- If you are on site, the location button places you with your GPS and you just tap the parcel you are standing on.
Why the numbers sometimes do not match
Splits and mergers. If the property was divided or joined with another, the Catastro assigns new numbers. A deed from decades ago may quote a parcel that no longer exists under that number.
Renumbering. After a land consolidation scheme (concentración parcelaria), the polígonos and parcelas of a whole area can change completely.
SIGPAC is not the Catastro. The EU farm subsidy system (CAP) uses SIGPAC, which identifies plots by province, municipality, polígono, parcela and recinto. It usually matches the Catastro, but not always: after recent changes they can differ.
Basque Country and Navarre. They run their own cadastres, with their own reference formats. In Navarre, for example, the reference is made up of municipality, polígono and parcela.
Found it. Now what?
- Get to the land: copy the coordinates into Google Maps, or open the property in the Catastro GPS app, which shows your position on the boundaries as you walk.
- See the boundaries: how to see a property's boundaries on a map.
- Find out who owns it: the Catastro does not publish the owner. How to find out who owns a property in Spain.
- By province: if you prefer to start from the province, for example the cadastre of Ourense or of León (in Spanish).
Frequently asked questions
Is searching by polígono and parcela free? Yes. Using the map, locating the parcel and seeing its basic details costs nothing.
Can I look up several parcels from an inheritance? Yes, one by one. If there are many in the same municipality, the trick in method 2 speeds things up a lot: you only change the polígono and parcela.
Can I use polígono and parcela to order a nota simple? They identify the land, but the Land Registry works with its own registry property number (finca registral). The cadastral reference is usually enough for the registry to locate it.



